How is a closing angle correctly installed?

Installing a strike angle requires precision and a few simple tools such as a drill, a screwdriver, and of course the strike angle itself. Here is a step-by-step guide on how to do it.

Step 1: Position the strike angle

Position the strike angle on the edge of the door where it is to be mounted. Make sure it is level and at the correct height. Mark the holes that need to be drilled.

Step 2: Prepare the drill holes

Use a drill or screwdriver to carefully drill holes at the marked positions. Make sure the holes are large enough to accommodate the screws, but not so large that they fit loosely.

Step 3: Secure the strike angle

Insert the screws through the holes in the strike angle and into the drilled holes in the door. Use a screwdriver to tighten the screws. Make sure the strike angle is firmly seated and does not wobble.

Finally, check whether the door closes properly and the strike angle works correctly. Proper installation of the strike angle helps ensure that your door closes securely and efficiently.