How do I properly install display cabinet and shell handles?

To properly install display cabinet and shell handles, you can follow these instructions step by step:

• First, you will need some basic tools such as a screwdriver, measuring tape, drill, screws, and of course the handles themselves.
• Next, measure the distance between the mounting holes on the handle. Use this measurement to determine the exact position on the cabinet or drawer where the handles should be attached.
• Mark the positions on the cabinet or drawer with a pencil. Make sure these markings are accurate, as they will determine the positions where you will drill.
• Use a drill to make holes at the marked spots. Make sure the holes are large enough to accommodate the screws you will use to attach the handles.
• Insert the screws through the inside of the cabinet or drawer and into the drilled holes. Tighten the handles using the screwdriver.

Finally, make sure that all handles are securely attached and do not come loose when you pull on them. With this method, you should be able to install any handle safely and properly.