How do I properly install a dowel rod into the wall?

Installing a wall anchor rod is a fairly simple process. Here is a simple guide on how to do it.

• First, you need to determine the spot on the wall where you want to attach the anchor rod. Use a spirit level to make sure the position is exactly horizontal.
• Use a pencil to mark the exact spots where the holes should be drilled. This should match the distance the anchor rod needs to bridge.
• Now, use a drill to make holes in the wall at the marked spots. The depth and diameter of the holes should match the anchors supplied with the rod.
• Insert the anchors into the drilled holes and tap them into the wall with a hammer until they are flush with the surface.
• You can now attach the anchor rod to the anchors. Secure the rod according to the manufacturer’s instructions; this is usually done with screws or bolts that are threaded through the anchor rod and into the anchors.
• Finally, check again that the anchor rod is firmly in place and secure.

Follow these steps to ensure that your anchor rod is installed correctly and safely.