How do I install swing door hinges on my door?

To install swing door hinges on your door, follow these steps:

• First, determine the position of the swing door hinges on the door frame and the door; these are usually the top and bottom edges. Mark the positions with a pencil.

• Then drill holes that match the diameter and depth of the door hinges. Use a wood bit that is slightly smaller than the hinge screws.

• Insert the hinges into the drilled holes and secure them with the screws provided. Check whether the hinges are properly aligned by making sure the door swings smoothly and closes by itself.

• If this is not the case, loosen the screws slightly, readjust the hinge, and tighten the screws again. Repeat this process until the desired result is achieved.

• Make sure that all components are firmly and securely installed. Correct installation of swing door hinges makes a significant contribution to their functionality and ensures a long service life.

During installation, it is important that you work carefully and precisely to avoid damage to the door or the door frame.