How do I install lift-up fittings for my cabinets?

To install lift-up fittings for your cabinets, you will need some basic tools, including a screwdriver, a drill, and possibly a chisel. Please note that each brand of lift-up fittings has its own specific installation instructions, so you should always follow the supplied manual. Here are the general steps you will need to carry out in most cases.

• First, measure and mark the positions where the lift-up fittings are to be attached to the cabinet doors and the cabinet carcass. Make sure the positions are the same on both sides to ensure the doors hang evenly.

• At your marked points, carefully drill holes for the screws of the lift-up fittings. Make sure you do not drill too deeply and damage the wood of your cabinets.

• Then attach the lift-up fittings to the cabinet doors and the cabinet carcass by securing them with screws. Make sure the fittings are firmly in place, but not so tight that they damage the wood.

• Finally, hang the doors on the lift-up fittings. They should open and close evenly and without binding. If necessary, adjust the position of the fittings until you are satisfied.