How do I install a screw-on hinge?

Installing a surface-mount hinge is a simple process that any DIYer can carry out. Here are the steps you need to follow:

• First, make sure you have selected the right hinge for your cabinet or door. It is important to choose a surface-mount hinge that matches the size and type of the door component it is to be attached to.
• Place the hinge in the position where it is to be installed. Use a spirit level to make sure the hinge is straight. Then mark the positions of the hinge holes on the wooden surface with a pencil.
• Carefully drill holes at the marked points. Make sure the holes are deep enough to accommodate the screws, but not so deep that they go through the wood.
• Position the hinge over the holes again and screw it firmly in place. Check that the hinge is securely mounted and that the door can be opened and closed without any problems.

By following these instructions, you should be able to install a surface-mount hinge. Remember to proceed carefully at each step to avoid damaging the door or the hinge.