How do I install a roller catch in my cabinet?

The installation of a roller catch in your cabinet can be done in a few simple steps.

Step 1: Determine the position

• First decide where you want to install the roller catch. In general, it should be positioned in the center of the door edge so that it engages properly and holds the door securely.

Step 2: Drill a hole

• Drill a hole that is large enough for the screws of the roller catch. Make sure the hole is deep enough so that the roller catch can be fully recessed into the cabinet.

Step 3: Position and secure the roller catch

• Insert the roller catch into the drilled hole and align it. Now secure it with the supplied screws. Make sure it sits firmly and does not wobble, so the door stays securely closed.

Step 4: Mount the strike plate

• The strike plate of the roller catch is attached to the opposite side of the door. Use a spirit level to ensure it is exactly opposite the roller catch. Then secure the strike plate with screws.

Voilà! You have successfully installed a roller catch in your cabinet.