How do I install a push handle on my door?

Installing a pull handle on your door is a simple task that you can do yourself with just a few tools. Here is a simple step-by-step guide:

Step 1: Positioning the pull handle

• Hold the pull handle against the door where you want to install it. An optimal height is usually between 90 and 110 cm from the floor, but ultimately it is a matter of personal taste and comfort.

Step 2: Marking the drill holes

• Use a pencil to mark the positions where you want to drill the holes for the handle. Make sure the handle is straight and evenly aligned.

Step 3: Drilling the holes

• Remove the handle from the door and drill holes at the marked positions. The drill bit size should match the size of your screws.

Step 4: Installing the pull handle

• Place the pull handle back on the door and align the holes with the marked positions. Insert the screws through the holes in the handle and tighten them.

Finally, make sure once again that the pull handle is securely attached and working properly. You have now successfully installed your pull handle!