Can I install ridge battens myself, and if so, how?

Of course, you can install ridge caps yourself. However, it is important to work carefully and purposefully. Below you will find a step-by-step guide that can support you through the process.

• Start by gathering the required materials and tools. You will need the ridge cap, roofing felt, nails, a hammer, a tape measure, a pencil, and a ladder.
• Measure the length of the roof ridge with a tape measure and cut the ridge cap to size accordingly.
• Lay a layer of roofing felt on the ridge. This serves as additional protection against moisture and should extend beyond the width of the ridge cap.
• Position the ridge cap on the roofing felt. Make sure it is aligned exactly along the ridge line.
• Fasten the cap with nails. Each nail should be driven in at intervals of about 30 cm.
• Check the cap for stability. If it still wobbles, add additional nails.

Please always remember your safety. Use a secure ladder and protective clothing, especially when working at great heights. If you feel unsure, consult a professional.